RK Rose + Krieger GmbH
About us
We are a subsidiary of the globally-active Phoenix Mecano AG, and a full-service provider offering a wide range of linear components, profile assembly technology, connecting and modular technology, which is unique in the market. Decades of experience and our application expertise in various industry sectors means that we are a competent partner. We are focussed on your needs, from the initial contact to delivery. Individual advice and rapid delivery are not mutually exclusive, but rather both result from our determined focus on customer needs.
Products & services
Height-adjustable monitor floor stand
Height-adjustable monitor floor stand With the new height-adjustable monitor floor stand, RK Rose+Krieger is expanding its "RK monitor holder" product range to include a robust, ergonomic standing workstation for industry. The work surface and monitor mounting are supported by a stable triple column system and can be adjusted conveniently by hand to the size of the respective user. The three elegant, slim anodised aluminium columns stand on a black, powder-coated base frame which provides space for an industrial PC and accessories. Cables are elegantly routed in the integrated cable duct on the rear column. The light grey coated work surface (0.3 m2) can be adjusted by hand easily thanks to the tieback support. A spring-loaded locking bolt provides reliable latching. The height adjustment stroke is 400 millimetres. This way the workstation can be adjusted individually to the body size of the user. In addition, the height of the monitor can be adjusted separately and thus guarantees optimum workstation ergonomics. The standard version of the monitor stand which RK Rose+Krieger supplies has feet and a pre-installed RK monitor mounting with rotary flange and round connecting plate. Pre-assembled modules are supplied for quick and easy set-up. Steering rollers for more mobility are also optionally available in place of feet. The stand can also be combined with all available RK monitor holders. With the height-adjustable monitor stand, RK Rose+Krieger supplies a small, easily adjustable, ergonomic standing workstation for industry. It can be set up quickly and is much more economical than complex workstation systems. Thanks to its appealing design, the stand is also fully suitable for use at trade shows or in office and reception areas.
RK Easywork – workstation systems
RK Easywork – workstation systems tailored individually to your production process Ergonomics and the optimum coordination of all workflows are key features of the height-adjustable RK Easywork workstation systems from RK Rose+Krieger. This protects the well-being of employees and increases productivity. The requirements of a manual workstation system are numerous, especially in the area of small and medium-sized series. As well as ergonomics, an optimum combination of manual, semi-automatic and fully automatic assembly and inspection procedures represents the biggest challenge when designing a user-friendly workstation. Configuring standard tables is straightforward with the online selection assistant With the RK Easywork selection assistant, a complete assembly workstation can be configured online to meet ergonomic and task-specific requirements. Step by step, the selection tool guides you through all of the options on the way to creating your ideal workstation. Additional lighting, holders for grab containers, foot rests, standing chairs and ESD accessories are all available, along with other useful devices. The RK Easywork assembly workstation system is based on RK Rose+Krieger's complete modular system. BLOCAN® construction profiles made from aluminium and the electrically driven lifting columns offer a perfect combination for the creation of high-quality table concepts. Customers can choose between the simplest static tables or electrically height-adjustable workbenches and configure their own combinations. You can then download the respective CAD data or a detailed data sheet for your self-configured workbench. You also have the option of sending an enquiry about this workstation system to RK directly.
Sneeze guard / droplet guard
Sneeze guard for point of sale, open-plan offices and reception areas On the safe side with a customisable sneeze guard The protection of employees and customers from a corona infection is currently a priority. RK Rose+Krieger has developed a sneeze guard system which can be adapted individually in size and design to suit the local conditions. Whether it's a stand-up model for counters, partitions suspended from the ceiling made from transparent plastic (polycarbonate) or larger partitioning systems for supermarket checkout areas – everything can be implemented quickly and simply. We are under ever-increasing attack from viruses, such as SARS, H1N1, influenza or the current Covid-19, which emerge in ever more aggressive forms. Protection against infection by airborne droplets has thus become extremely important – in particular at the point of sale, at reception desks, in medical practices, at pharmacies and in the checkout area in retail. However, partition panels are also a useful form of protection in open-plan offices if the required distances between workstations cannot be maintained. Stable, transparent partitions provide an effective barrier against airborne infection. RK Rose+Krieger has been providing safety guards and partition systems for industrial use for many years. Based on this modular system RK has now conceptualised modules from aluminium tubes and transparent polycarbonate partitions which can be adapted individually to the respective situation. The product specialists at RK Rose+Krieger are on hand to provide advice. These sustainable solutions are available for order immediately. We will be happy to advise you and work on a special solution together with you. Features: Simple setup and quick assembly Easy to clean Flexible dimensions and versions available for delivery Short delivery times and very good service Special versions (panels, colours, fastening, special dimensions)
RK stand system for holding and positioning
Maximum stability and flexible alignment for loads of up to 60 kg – the RK stand system, which now forms part of the RK Rose+Krieger standard range, offers it all! As a specialist for linear, profile, assembly connecting and modular technology, we once again demonstrate the multitude of options of product lines which are mutually compatible. The new high-grade stand system is ideally suited for holding and positioning industrial marking, display and operating devices, such as labelling machines, optical readers, camera systems or 3D scanners – to name but a few. The respective load can be aligned precisely in the space and adapted to changing requirements. Features: Straightforward vertical and horizontal manual adjustment Self-locking trapezoidal screw spindles Vertical or horizontal connection elements for terminal devices Axes freely lockable thanks to lift clamp Adjustable axes guide Anodised aluminium base with adjustable feet Load-bearing capacity of up to 60 kg
Tube connectors with ball joint made of aluminum and plastic
RK Rose+Krieger is expanding its product range of aluminium (Solid Clamps) and plastic (Light Clamps) tube connectors to include a total of seven clamping elements with a size 18 ball joint. Following on from the successful acceptance of four aluminium tube connector models with a size 30 integrated ball joint on the market, three more variants with a ball joint are now complementing the Solid Clamps series. Size 18 base, angle and hinge clamps are the new additions to the range. The series of Light Clamps has also been expanded. Four new plastic tube connectors with ball joints, also size 18, are now available to complement the product range. In addition to the variants mentioned above, this also includes a sleeve clamp. All the new ball clamps have a universal connecting plate that can be rotated 360° to ensure flexible connection and feature two slotted holes and two threads. The connecting plates’ pivoting range is 60° in each case. The clamping elements can be freely adjusted and easily fixed. This makes them ideal for the construction of flexible tube structures, as well as for mounting sensors, reflectors and other elements that need to be precisely aligned or readjusted more frequently, depending on the production requirements and product. A special surface coating on the ball joint makes for a high-strength clamping connection. Features: can be pivoted freely by 60°/can be rotated 360° can be combined with size 18 and 30 tube connectors the clamps feature a universal connecting plate for flexible integration high-strength clamping thanks to special finishes
Multilift II lifting column with internal carriage
The new member of the Multilift II lifting column family is the ideal solution wherever a vertical adjusting movement is required in combination with a defined installation dimension. A distinctive feature of the lifting column is its constant-length design. Thus, the internal carriage of the lifting column is moved and the load guided on the side of the external profile. As a dual-column system, the lifting column with internal carriage, stroke lengths of up to 498 mm (special stroke lengths of 1000 mm max. are possible) and fixing slots in the external profile, is predestined for material lifting mechanisms next to a height-adjustable assembly workstation. When combined with the premium version of the MultiControl II quadro drive controller, all lifting columns can be moved individually, in parallel or synchronously using the controller's drive group management. Features: Integrated limit switches Self-locking, even under max. load Lateral fixing slot in the external profile Hall sensor for position feedback Options: Special stroke lengths and installation heights on request Multiple lifting columns can be moved in the BUS system (with synchronous control) Custom solutions on request
Stainless steel assembly system (EMS)
Smart stainless steel assembly system (EMS) for frame structures in the food industry and in clean rooms Stainless steel is the material standard for installations in clean rooms, for filling, packaging and conveying systems in the food industry and for all areas which are at risk from corrosion. As a specialist for niche products for these fields, we have now developed stainless steel connection elements which can be used in conjunction with special clamping technology to assemble and disassemble frame structures made from square or round tubing in the common size 40 quickly, reliably and without the need for specialist knowledge