Exhibitor products

• M12 slots • M12 plug connection for the bus • Basic setting: 4 x AND or 4 x OR linking of the input signals • Wide range of parameterization options via IO-Link interface

• 2-fold logic distributor • M12-connector for the connection cable • 2 M8 sockets on the input side, logically AND- / OR-linked • Minimized wiring effort • Transparent housing - clearly visible switching status LED

The Logistics/Service division encompasses the entire process from order receipt through item-specific storage, packaging/shipping, and downstream services. This process can also be fully or partially outsourced to third-party companies for their production. Our order logistics is tailored to your wishes and needs regarding type, time, quantity, quality, and costs. We offer: Comprehensive logistics services tailored to our customers’ needs Professional order processing Guaranteed on-time deliveries Cost-optimized warehousing for your products Support with worldwide shipping of your products Qualified service

Pneumatic clamps are standard elements in jig construction, and Ganter has carried these important fastening systems in its portfolio for some time. The product family has now been reworked – primarily to increase its lifespan and reliability. The most significant improvement concerns the pneumatic cylinder, which now operates with a magnetic piston and has T-slots on the housing. Thanks to this slot, it is now much easier to attach sensors, while the magnetic piston permits more precise querying of the current position by the new, modern sensor GN 3380, which entirely replaces the previous sensors. Of course, other sensors can also be precisely installed in the slot. The pneumatic clamps of the GN 860 series now have hardened, ground bearing bushings and tempered bearing pins for significantly reduced wear. No meaningful alterations were observed in testing for over 250,000 cycles. Structural reinforcement of the sheet steel housing reduces wear-inducing vibrations during operation, which makes a difference even under lower loads. And, finally, the new one-way restrictor in the cylinder enables smoother travel to extend the lifespan of the piston. For high retaining forces, such as are required in car body manufacturing or in pressing or welding lines, Ganter provides the pneumatically operated power clamps of the family GN 864. As part of its optimization strategy, Ganter has made two valuable improvements here. The housings of the standard versions are no longer blackened; they are chemically nickel-plated instead, which considerably increases the corrosion resistance. The FG type is designed specially for welding jigs: The PTFE coating in a characteristic green color prevents weld spatter from sticking – a useful addition to the optionally available protective covers, which ensure long-lasting operation even in aggressive environments. More information on Ganter standard parts can be found on the internet at www.ganternorm.com

ATLANTA Lubrication Systems - the innovative lubricant supply for your machine

Are you looking for a flexible method of marking your parts and want to optimise your production? Perhaps you are working with needle or scribe embosser, which are not always suitable for your product surfaces and also require a lot of wear and maintenance? - Then switch to the Mobil-Mark LX4! It can mark both medium and large parts immediately, on the spot, and the set-up effort is reduced to a minimum. Thanks to certified laser protection class 1-technology, there is no need for additional safety precautions. This saves time and money.

M12 circular connectors are one of the most widely used sizes for circular connectors. The M12 size is available in coding variants for all industrial lifelines – for power, signals and data. IP65/67 protected and packaged in a rugged metal housing, they provide a completely reliable connection when used in demanding applications. With the M12 configurator, you can create customised cable assemblies for your application in just a few clicks. These are ready for despatch within 48 hours.

The M12 connector has been introduced in 1985, so almost 40 years ago. During the first decades this technology was mainly used in the automotive industry, but thanks to the digitisation and industry 4.0 the M12 connector experienced an incredible boom which still lasts. Bus systems, automation, robotics and IIoT create a basis for further, numerous components and devices that are wired with a M12 connector. An increase in enquiries and also further development of the M12 technology can be expected for the next years. This is currently evident by improvements, as for example the push pull mechanics where there is a "click" when connecting the plug. For some fields, the vast spread is still exclusive in Europe, but the M12 connector has been established globally in general. Which factors accelerated the development? The catalyst for this trend was the request for a reliable, error-free and easy to install connector which preferably is resistant against humidity and dust. The pros become also evident during maintenance work or other situations when the connection has to be unplugged. The reconnection for conventional wiring is more time-intensive and also prone to mistakes. Thanks to the M12 connector this is done easy and fast, furthermore it is almost impossible to wrongly plug the M12 connection. The requirement for an internationally standardised system was another reason for the development and spread of the M12 connector as globally compatible systems can be realised by it. What specific benefits do you see? The benefits of the M12 connector are obvious: • standardised system • very robust and reliable • numerous applications possible • simple and almost error-free installation • considerably reduced cabling effort • easy diagnosis of the system

The Size 15 metric circular connectors from HARTING offer robust and reliable connectivity solutions. Designed for demanding industrial applications, these connectors excel in harsh environments. With their compact form factor, they provide efficient space utilization while maintaining high performance. Explore our range of Size 15 connectors to find the perfect fit for your specific requirements.

M12 circular connectors are one of the most widely used interfaces in automation. They are used wherever robustness and high protection must be guaranteed. The only drawback so far has been the time-consuming assembly. Installers have to check the secure connection with torque tools, which is time-consuming. The IEC standard 61076-2-010 finally brings an industry-wide uniform push-pull locking system for circular connectors in factory automation. Slow screwing was yesterday. With PushPull it's: Click & Connect! Connected simply, quickly and reliably. Regardless of whether the device socket is vertical or recessed, a PushPull locking system in accordance with IEC 61076-2-010 always gives device manufacturers the right solution from a single source.

In order to make material usage and space requirements in connection technology suitable for the application again, HARTING is presenting circular connectors in size M17. With a power transmission of up to 7.5kW and the increased efficiency of modern drives, the use of an M17 interface offers clear savings potential. With different coding combinations of signal, power and PE, almost all applications for modern drives can be covered.

MAC - The complete solution for medium to larger power ratings. With built-in mains power supply. Choose between model with or without brake. Also in IP65 version. Choose Expansion module from an extensive selection for any application. Motor size is: MAC400-D2 400W MAC400-D5 (with built-in brake) 400W MAC800-D2 746W MAC800-D5 (with built-in brake) 746W MAC1200-D2 1182W MAC1200-D5 (with built-in brake) 1182W MAC1500-G2 - 1.5kW MAC1500-G5 (w. brake) - 1.5kW MAC3000-G2 - 3.0kW MAC3000-G5 (w. brake) - 3.0kW MAC4500-G2 - 4.5kW MAC4500-G5 (w. brake) - 4.5kW Features: Absolute multiturn encoder without battery Real-time industrial Ethernet: Profinet, Ethernet/IP, MODBUS TCP, EtherCAT, Powerlink and SercosIII 2 RS422 channels for encoder in/output and SSI encoder etc. 6IO for capture of position, interrupt, counters, enable, timer and PLC functions Expansion module you can choose between: Basic Modules Programmable Modules Field Bus Modules High Speed Multi-Axis Modules Wireless Modules Industrial Ethernet Modules

JVL Industri Elektronik A/S is proud to announce a completely new generation of Mini-MAC (50-141 W) servo motors. This new motor family is based on previous designs and customer feedback collected for many years and offers a wide pallet of options and possibilities which makes this product fit into almost any application. Key features: - High dynamic servo regulator - Industrial Ethernets - 6 protocols - Absolute multiturn encoder unlimited down time (no battery!) - Safe Torque Off (STO) input - Wide supply range 7 to 48 VDC - Very energy efficient - Brake control (ext. brake) - 0 - 4000 RPM / 50 - 140 W - Protection class up to IP67 - Wide program of option modules - Connectors: M12 industrial What is new ? • Absolute multiturn encoder harvesting technology without battery or gear • Ethernet high performance similar to other MAC motors • More advanced FOC filter for lower noise and better motor performance • New Mosfet technology for higher efficiency and cooler motor • Encoder resolution 8196 CPR. Higher resolutions soon to come • STO or Brake connector optional

The MAC802, MAC1202 and MAC1403 represent JVL’s new generation of integrated DC servo motors. Designed for low-voltage operation from 12–60 VDC (typically 24–48 VDC), they combine motor, controller, power electronics and encoder in one compact unit. This significantly reduces cabling, cabinet size and installation time. Performance data: MAC802: approx. 750 W continuous power, 2.4 Nm nominal torque, up to 7.2 Nm peak, length approx. 156 mm. MAC1202: approx. 1180 W continuous power, 3.82 Nm nominal torque, up to 11.46 Nm peak, length approx. 190 mm. MAC1403: approx. 1500 W continuous power, 4.78 Nm nominal torque, up to 14.34 Nm peak, length approx. 200 mm. Peak power can reach up to 4500 W depending on the model. The speed range is 0–3000 RPM (max. 3600 RPM). Key features: Fully integrated design with built-in servo controller, power stage and battery-free multi-turn absolute encoder. Support for multiple industrial Ethernet protocols such as EtherCAT, Profinet, EtherNet/IP and Modbus TCP. Integrated ePLC for standalone, decentralized motion and application control inside the motor. STO safety function (Safe Torque Off). Robust industrial housing with IP55, optional IP66/IP67, and M12/M16 connectors. Wide selection of interface and option modules: RS485, traditional fieldbuses, digital I/Os, CANopen, IO-Link, wireless extensions and more. Application advantages: With their decentralized architecture and compact, all-in-one design, these motors are ideal for compact machinery, mobile or battery-powered equipment, and modern Industry-4.0 systems. They help to reduce wiring complexity, improve EMC performance and simplify installation.

For many years, MACH LED PLUS.forty has been recognized around the world as the benchmark for outstanding machine lighting. Thanks to continuous further development, it not only remains at the cutting edge, but also repeatedly opens up new application possibilities with innovative ideas. REDUCE COSTS The new CORE variants with high-output increase the light level in the machine tool to an unprecedented level. Compared to other luminaires, the illuminance levels of MACH LED PLUS.forty are up to 20 percent higher. This is how MACH LED PLUS.forty enables needs-based illuminance levels with fewer or smaller luminaires – saving you money. MINIMIZE RISKS Our own test and inspection laboratory ensures that the lights meet all relevant standards and guidelines, as well as the high demands placed on machine tools. In addition, we offer a generous guarantee and service worldwide AVOID DOWNTIME The vibration and shock-resistant design results in exceptional robustness. The crossover-free sealing technology eliminates the risk of leaks. A process-safe automated bonding process, with plasma cleaning, climate-controlled adhesive curing and 100% vacuum leak testing, guarantees the reliability of each individual luminaire. Important contributions to uninterrupted machine operation. CONSERVE RESOURCES The MACH LED PLUS.forty was designed to be repairable. The sustainable lighting concept and efficient LED technology help to achieve environmental goals. Additional colored LEDs for displaying machine status.