Exhibitor innovations

Our new display series sets standards in terms of quality and flexibility combined with a very attractive price-performance ratio. Its features enable it to be used in numerous sectors and demanding industrial environments: - Available sizes: 2,4” to 7” with resolutions from 320 x 240 px to 1024 x 600 px - Suitable for sunlight: 1000 cd/m² brightness (PWM dimmable) - High-quality display: IPS panel (up to 178° viewing angle) - Industrial quality: Extended operating temperature range from -30 to +80 °C - Flexible options: With or without capacitive touch panel (CTP) - Easy installation: Adhesive frame with protection classes up to IP66/67 possible (touch displays) Interface: 24-bit RGB - Standardised connector system: Hirose connector with the same pin assignment for all variants (no ZIF connector) - Power supply: Requires only a 3.3 V power supply - Plug&Play: With suitable display controller boards (find out more at “Matching products for “Plug&Play”) - Customisation: Options available on request (including optional labelling, surface finishing, special protective glass, hardware and software) and possible from a requirement of approx. 500 units The matching display controller board in combination with the latest Espressif microcontrollers (P4 or S3), supports smart functions such as WiFi, Bluetooth or flexible information processing and offers interfaces to the ‘outside world’ (including CAN, UART and I2C) via adapter boards. The new TFT Touch Displays series was designed with the intention of offering outstanding quality and performance at an attractive price. We offer customised solutions for orders of 500 units or more. As part of our design-in and FAE support, our consulting services help customers to find the right solution for every application. The displays are particularly suitable for use for measurement technology, industry & automation, smart home / building technology, medical technology, eMobility and home appliances.

NX series RFID safety switch with lock is the world's smallest device in its category. > Maximum technology in the minimum volume Its dimensions of just 30x30x94.5 mm, and its volume of only 85 cm3 make the NX series safety switch, the smallest in the world in its category. > High safety standards guaranteed This switch offers all the well-established features of the Pizzato brand, such as the RFID technology installed in the actuator and the highest guaranteed safety levels PL e and SIL 3. > Metal head and technopolymer body The housing of this device is made of two different materials: the metal head ensures maximum impact and strength when the door is locked, and the technopolymer body ensures the lightweight and flexible construction of the device. > Fast diagnosis of operational state thanks to the RGB LEDs The illuminated cap positioned on the head of the device allows a quick diagnostic of inputs and outputs functional states. > Bistable operating principle This new operating method activates the internal solenoid by means of short electrical impulses that stabilise its position in either the unlocked or locked state. The most significant advantage resulting from this is the considerable reduction in energy consumption and warming up of the switch. > Straightforward mounting Mounting is carried out using just two M5 screws on the front with a hole spacing of 20 mm, whereby it plays no role whether the doors open to the right or left or if they are sliding or hinged doors. This is achieved by the presence of three entry openings for the actuator, which eliminate the need to rotate the head or the switch. > Recent updates for this device: - Three auxiliary releases in a single device, one corresponding to each actuator input - Various connection options: with an integrated M12 connector connection, cable wiring with variable cable length (up to 10 metres) or cable wiring with cable length up to 3 metres and M12 connector at the end.

NX series RFID safety switch with lock is the world's smallest device in its category. > Maximum technology in the minimum volume Its dimensions of just 30x30x94.5 mm, and its volume of only 85 cm3 make the NX series safety switch, the smallest in the world in its category. > High safety standards guaranteed This switch offers all the well-established features of the Pizzato brand, such as the RFID technology installed in the actuator and the highest guaranteed safety levels PL e and SIL 3. > Metal head and technopolymer body The housing of this device is made of two different materials: the metal head ensures maximum impact and strength when the door is locked, and the technopolymer body ensures the lightweight and flexible construction of the device. > Fast diagnosis of operational state thanks to the RGB LEDs The illuminated cap positioned on the head of the device allows a quick diagnostic of inputs and outputs functional states. > Bistable operating principle This new operating method activates the internal solenoid by means of short electrical impulses that stabilise its position in either the unlocked or locked state. The most significant advantage resulting from this is the considerable reduction in energy consumption and warming up of the switch. > Straightforward mounting Mounting is carried out using just two M5 screws on the front with a hole spacing of 20 mm, whereby it plays no role whether the doors open to the right or left or if they are sliding or hinged doors. This is achieved by the presence of three entry openings for the actuator, which eliminate the need to rotate the head or the switch. > Recent updates for this device: - Three auxiliary releases in a single device, one corresponding to each actuator input - Various connection options: with an integrated M12 connector connection, cable wiring with variable cable length (up to 10 metres) or cable wiring with cable length up to 3 metres and M12 connector at the end.

NX series RFID safety switch with lock is the world's smallest device in its category. > Maximum technology in the minimum volume Its dimensions of just 30x30x94.5 mm, and its volume of only 85 cm3 make the NX series safety switch, the smallest in the world in its category. > High safety standards guaranteed This switch offers all the well-established features of the Pizzato brand, such as the RFID technology installed in the actuator and the highest guaranteed safety levels PL e and SIL 3. > Metal head and technopolymer body The housing of this device is made of two different materials: the metal head ensures maximum impact and strength when the door is locked, and the technopolymer body ensures the lightweight and flexible construction of the device. > Fast diagnosis of operational state thanks to the RGB LEDs The illuminated cap positioned on the head of the device allows a quick diagnostic of inputs and outputs functional states. > Bistable operating principle This new operating method activates the internal solenoid by means of short electrical impulses that stabilise its position in either the unlocked or locked state. The most significant advantage resulting from this is the considerable reduction in energy consumption and warming up of the switch. > Straightforward mounting Mounting is carried out using just two M5 screws on the front with a hole spacing of 20 mm, whereby it plays no role whether the doors open to the right or left or if they are sliding or hinged doors. This is achieved by the presence of three entry openings for the actuator, which eliminate the need to rotate the head or the switch. > Recent updates for this device: - Three auxiliary releases in a single device, one corresponding to each actuator input - Various connection options: with an integrated M12 connector connection, cable wiring with variable cable length (up to 10 metres) or cable wiring with cable length up to 3 metres and M12 connector at the end.

NX series RFID safety switch with lock is the world's smallest device in its category. > Maximum technology in the minimum volume Its dimensions of just 30x30x94.5 mm, and its volume of only 85 cm3 make the NX series safety switch, the smallest in the world in its category. > High safety standards guaranteed This switch offers all the well-established features of the Pizzato brand, such as the RFID technology installed in the actuator and the highest guaranteed safety levels PL e and SIL 3. > Metal head and technopolymer body The housing of this device is made of two different materials: the metal head ensures maximum impact and strength when the door is locked, and the technopolymer body ensures the lightweight and flexible construction of the device. > Fast diagnosis of operational state thanks to the RGB LEDs The illuminated cap positioned on the head of the device allows a quick diagnostic of inputs and outputs functional states. > Bistable operating principle This new operating method activates the internal solenoid by means of short electrical impulses that stabilise its position in either the unlocked or locked state. The most significant advantage resulting from this is the considerable reduction in energy consumption and warming up of the switch. > Straightforward mounting Mounting is carried out using just two M5 screws on the front with a hole spacing of 20 mm, whereby it plays no role whether the doors open to the right or left or if they are sliding or hinged doors. This is achieved by the presence of three entry openings for the actuator, which eliminate the need to rotate the head or the switch. > Recent updates for this device: - Three auxiliary releases in a single device, one corresponding to each actuator input - Various connection options: with an integrated M12 connector connection, cable wiring with variable cable length (up to 10 metres) or cable wiring with cable length up to 3 metres and M12 connector at the end.

Ganter is expanding its portfolio with a completely new product family: a thoroughly designed selection of various casters and wheels. Ganter’s standard parts selection is growing once again – with the recent addition of an entirely new category for wheels and casters. The establishment of the new catalog group 3.10 is a clear indication that these mobility-enabling standard parts will have all the room they need. That is only logical given that the wheels and casters serve to complement their proven but static leveling feet relatives, which are available in many different versions. As always, Ganter is entirely focused on practical requirements: the individual types are organized according to the applicable ISO testing procedures, making it easy to associate them with the most important configuration parameters. For example, the new range includes light duty casters with low load capacity, medium duty casters for industrial use and heavy duty casters designed for high dynamic loads coupled with higher travel speeds. Casters are ready-to-install parts consisting of a wheel and a bracket, with the latter generally made of bent sheet steel, except for the heavy duty versions of welded steel. The bracket, available in swivel or fixed versions, holds the wheel and serves for mounting the caster. Fixed casters provide lateral guidance to ensure stable travel both straight and on curves. The swivel brackets with ball bearings enable maximum maneuverability with 360-degree rotation and movement in any direction, a property that is particularly advantageous in tight spaces. Optionally integrated total lock brakes prevent the wheel from turning or rotating in the steering axis, and variants are also available with extendable leveling feet for an even more secure stand. More information on Ganter standard parts can be found on the internet at ganternorm.com

The new RMU series of magnetic rings from BOGEN Magnetics is designed for use with standard absolute magnetic sensors available in the market and various sensing technologies, such as Hall Effect and magneto-resistive. They can be magnetized radially or axially and are available in a range of hollow shaft diameters from 15 to 70 mm. These rings are the perfect match with the AKP18 absolute magnetic sensor. The AKP18 is extremely light and compact, ideal for the tightest spaces. It can be paired with a variety of rings with radial and axial magnetization, and linear solutions are also possible. The AKP18 sensor provides the absolute information via the SSI or BiSS-C interfaces. The resolution is up to 20 bits. It can be operated at a work temperature of up to +100°C, and two integral LEDs provide useful diagnostic information. It is even possible to install and operate up to seven AKP18 measuring heads with Wire2board connectors in a Daisy Chain network connection.

The thermal imaging camera series PYROVIEW, which has proven itself over many years, has now been expanded with a new model in the short-wave infrared spectral range (SWIR). The PYROVIEW 512S camera has a high-dynamic InGaAs array of the latest generation, which allows images with 512 x 408 pixels at a frame rate of up to 60 Hz. The device enables non-contact temperature measurements in the spectral range from 1.4 µm to 1.6 µm starting at 300 °C. Two temperature measuring ranges are available as standard (measuring range 1: 300 °C to 750 °C, measuring range 2: 700 °C to 1200 °C). To adapt to different measuring object sizes and distances, there are four lens variants with aperture angles of 54° x 44°, 37° x 29°, 24° x 19° or 12° x 10°. The lenses have a motor focus without external moving parts. Two different housing variants are available. The PYROVIEW 512S compact+ device has an aluminum housing (IP54) for universal applications. For particularly harsh industrial environments, the PYROVIEW 512S protection variant is available in an IP65 stainless steel housing with protection window, air purge and optional water cooling. The cameras have an Ethernet interface that allows lossless and low-delay data transmission in real time up to the maximum frame rate. Software packages PYROSOFT (online/offline) specially developed for the cameras for data aquisition and analyzing as well as for connection to process control systems are available. Together with the new PYROVIEW 512S thermal imaging camera, suitable PYROVIEW camera models with different temperature and spectral ranges, pixel numbers as well as optics and housing variants are now available for many applications, especially in industrial process measurement technology:

A system solution that is both optimized and efficient! The system consists of the SINAMICS S200 servo drive, the SIMOTICS S-1FL2 servo motor, and Motion Connect cables. With a power range of 0.1 to 7 kW and various communication options such as PROFINET IRT and pulse train, the system is designed for a wide range of standard applications.

A system solution that is both optimized and efficient! The system consists of the SINAMICS S200 servo drive, the SIMOTICS S-1FL2 servo motor, and Motion Connect cables. With a power range of 0.1 to 7 kW and various communication options such as PROFINET IRT and pulse train, the system is designed for a wide range of standard applications.

Unlock the Future – No Batteries. No Wires. Just Pure Control. Experience the power of NFC: Our retrofit-ready smart lock brings seamless, battery-free access to your commercial furniture. Precision-controlled, maintenance-free, and designed for the modern workspace. Smart. Sleek. Effortless.

The discontinuation of the classic SIMATIC HMI Comfort Panels by Siemens poses challenges for many machine and plant operators. However, the new notion.S Comfort Panels offer a powerful, mounting-compatible, and long-term available solution that not only preserves your visualization but also makes it future-proof. Future-proof alternative for your HMI landscape The notion.S Comfort Panels are fully functionally compatible with the previous SIMATIC HMI Comfort Panels and enable seamless replacement – without any mechanical adjustments. Existing HMI projects can continue to be used, protecting investments and avoiding downtime. Your advantages at a glance _ Mounting-compatible replacement No conversion necessary – notion.S Panels are mechanically identical to previous Siemens models. _ Continued operation of existing visualizations Your existing HMI projects remain fully usable. _ Project planning with familiar tools Continue to use the SIMATIC TIA Portal and your familiar engineering environments. _ Long-term availability More than 10 years of supply security – ideal for long-lasting machine concepts. _ Ready for HMI Advanced Future-oriented performance for demanding visualization tasks. _ Ready for Unified Server & Client Compatible with modern unified architectures – for scalable and networked solutions. _ Compatible with your Siemens environment The notion.S Comfort Panels integrate seamlessly into existing Siemens infrastructures: _ SIMATIC TIA Portal _ SIMATIC HMI Comfort Panel _ SIMATIC WinCC Runtime Advanced _ SIMATIC WinCC Unified PC Runtime With notion.S, you can rely on a solution that secures your visualization in the long term – while paving the way to modern HMI worlds. © Siemens, WinCC, and SIMATIC are registered trademarks of Siemens AG, Munich

o6\Embedded extends open62541 to support OPC UA on the smallest devices, right down to the microcontroller level. We achieve a RAM consumption of less than 100 kB for a complete OPC UA server, including encryption. Support is available for FreeRTOS, Zephry, and many other operating systems.

Octoplant is the established industry standard for storing, versioning, and comparing entire production environments, providing fast recovery and protection against unwanted changes.

The latest generation VHV5 code reader was specifically developed to meet the complex requirements of a wide range of industrial applications. Featuring a sophisticated front-end imaging system, the new X-Mode 6.0 decoding algorithm, and a powerful multi-core processor, the VHV5 is designed from the ground up to easily handle both extremely fast labeling lines and complex direct marking applications – and can be deployed in a very short time. It is ideal for every industry: food, beverage & consumer goods, automotive/electric vehicles, logistics automation, electronics, household appliances, high-speed printing, and document processing. The reader offers unparalleled performance and reliability – for every code, every application, every operator, and every production line. The VHV5-F autofocus multi-code reader, combined with the WebLink user interface, offers unprecedented reading performance and a modern user experience. Even complex code reading applications can be easily and efficiently set up directly on the shop floor – regardless of the user's experience level. The reader features an integrated illumination system that is ten times more powerful than the MicroHAWK reader series. It is also available with a 2.3-megapixel global shutter sensor capable of 80 frames per second or a 5-megapixel global shutter sensor capable of 40 frames per second. A powerful quad-core processor with an integrated NPU (Neural Processing Unit) enables near-frame-speed reading in most applications. The WebLink user interface includes Smart Quick Set functions that allow demanding applications—such as reading static Direct Part Marks (DPMs) or highly dynamic labeling processes—to be trained, optimized, and commissioned within seconds.