Exhibitor products

Ensure with electronic protection devices reliable protection of standard components of industrial automation applications. With a protected application, each load is protected and operated individually to enable easy and fast troubleshooting. The devices feature the lowest power loss on the market and an impressive performance in severe conditions. From 0.5 to 12 A in a 25mm device, seamless expandability, front-top wiring, and easy integration with most ABB devices for a consistent and affordable portfolio. Main benefits: - Compact size to reduce required space in cabinets - Energy efficient: lowest power loss - Save time with push-in terminals and easy expansion with jumpers  - Certified product for global use (UL 508 listed)

The Epson LS-B series is both powerful and cost-effective with its performance, as well as with its low acquisition and operating costs. The Epson LS-B 4 axis robot (including a controller) is a worthwhile investment and is designed to work in environments, which were typically reserved for linear systems, or other less flexible machines. Advantages at a glance - Batteryless encoder - Space and energy saving - New top-of-arm layout - Built-in camera cable - Reduced cable height Batteryless encoder Minimise downtime and reduce overall cost of ownership. Built-in camera connector It all comes integrated with an RJ45 Ethernet connector for easy vision system setup. User-friendly top-of-arm layout An extra ethernet port and screw holes make for easy top of arm equipment mounting and welcome extratime saving. Everything is spaced out for easier than ever access. Reduced cable height The space-saving, compact design cuts cabling down to size: ideal for hard to reach work cell layouts.

A robot for every application Introducing the Epson ProSix C-series: six-axis robots with the range and load capacity for every application – and precision as standard. With a large range, you’ll find one perfectly suited to your needs. Whatever your industry, the Epson ProSix C-series robots are equal to the challenge. Marked out by their slim, compact design, they can work with maximum precision even at high speeds, thanks to our QMEMS® sensor technology. Fast, sleek, precise operation If you’re looking for a robot that can work in confined spaces, often in conjunction with other robots, and is accurate even when time is short, you’re looking in the right place. The Epson C-series can help your system reach its full potential. The six-axis machines work at high speeds with precise path behaviour, all in an ultra-slim body. The variety of assembly options gives you all the flexibility you need.

With over 300 variations, arm lengths from 175 mm to 1,000 mm, load capacities from 1 kg up to 20 kg and a range of installation types and protection classes, Epson’s range of SCARA robots (Selective Compliance Assembly Robot Arm) provides the high performance and reliability that Epson robots are famous for. Designed for virtually any application and perfect for an economical automation solution.

Ideal for pick-and-place applications Intelligent, efficient and cost-effective, the comprehensive T-Series range is designed to make simple pick-and place applications run more smoothly. These 4-axis robots are the ideal automation solution where linear systems are used. Benefits of the T-Series at a glance: - Flexibility: the 4-axis robot provides a great range of motion - Intelligence: powerful, integrated controller and system connection - Efficiency: simple cabling for easy operation and maintenance - Energy-saving: low power consumption - Space-saving: very small footprint, which includes the controller - Sustainability: battery-free position sensor

Compact, easy-to-use and affordable Maximum usability for simple tasks Automate your simple, repetitive material handling tasks and allow your team to concentrate on more creative work. Engineered for maximum usability, with a low total cost of ownership (TCO), the VT6-L is ideal if you’re looking for an affordable solution to non-automated tasks – especially within the automotive, medical and electronics sectors. Simple to set up, easy to integrate As the first model in the Epson VT series to offer the all-in-one concept, you can plug in and begin even if you have limited robot installation experience. Designed with simplicity and flexibility in mind, the VT6-L can be integrated easily into a variety of environments and scenarios – from machine tending to packing and placement. With a range of 900mm and a payload of up to 6kg, the VT6-L can accommodate low volume production with a high mix of repetitive tasks. It’s perfect if you’re looking to take the first step towards automation or are looking to downsize existing machinery

From individual cables to fully assembled devices: dresden elektronik offers comprehensive services in device construction and cable assembly – everything from a single source, everything 100% made in Germany. Our production combines electronics, mechanics and assembly to create perfectly coordinated complete systems. Thanks to our in-house cable assembly, mechanical component manufacturing and final assembly, we deliver ready-to-install devices that are precisely tailored to customer requirements – whether single items, small batches or series production. In the field of cable assembly, we process stranded, ribbon, round and coaxial cables with the highest precision. Crimping, soldering, stripping, pressing or connector assembly – each step is carried out according to certified processes and is checked before the connection becomes part of a device. In device construction, we combine electronics, housings and mechanics to create durable, robust and service-friendly systems. On request, we also take care of the assembly of operating and display elements, labelling, testing and packaging – including final testing and documentation. Thanks to the direct connection to our development and production areas, our customers benefit from short lead times, technical coordination and maximum flexibility – even with a wide range of variants or short-term adjustments.

eSIGN - the new benchmark in industrial signalling eSIGN is the future of signal technology – a signal tower that, thanks to electronic modularity, sets new standards. Powerful features, maximum compatibility and an industrial design that blends functionality with style and robustness. As the latest generation, eSIGN defines the future of the signal tower.

For networking within Industry 4.0, ethernet-based data transmission is the basic requirement for IoT / IIOT / IoE / IIoE. The METZ CONNECT terminals suitable for Industrial Ethernet offer an interesting alternative to RJ45 and M12 connectors. The reasons for this are both the cost advantages of a permanent connection through a reduction in components, as well as the installation-friendly and tool-free connection. The 8-pin IDC from METZ CONNECT is suitable for a data transfer rate of up to 10 Gbit/s. Advantages connection technology for the IoT / IIOT / IoE / IIoE devices of the future suitable for industrial ethernet systems up to 10 Gbit/s data transmission color coding for wire colors according to T568A reconnectable component reduction enables a cost-effective solution stripping-free connection technology easy to install connection without special tools

Neugart is introducing further planetary gearboxes with pinions pre-assembled at the factory. For rack and pinion drives, planetary gearboxes with a factory-mounted pinion offer the ideal drive solution. Neugart is now introducing a particularly economical model with this option and is also refining the corresponding range. This allows design engineers to choose from an even greater number of possible pinion and gearbox combinations when implementing racks. For the first time, Neugart is now offering the PLPE Economy planetary gearbox with a factory-mounted pinion. This provides a particularly economical alternative for selection. The PLPE offers high performance at the price of an economy gearbox: It is based on the proven Neugart economy gearing technology. The reinforced deep groove ball bearings mounted on the output side are designed for greater radial and axial forces – compared to the PLE gearbox. Thanks to the wide range of different motor adapters, the PLPE can be attached to almost all standard servo motors in just a few simple steps. Its compact outer contour also allows it to be used in situations where space is limited. The PLPE is available with a pinion in four frame sizes: 070, 090, 120 and 155. The PK1 series of pinions has also been added to the range. These pinions are mounted on the toothed output shaft of the gearbox. Toothing to DIN 5480 ensures the necessary connection reliability. A total of seven additional PK1 pinions are now available: two with helical teeth and five with straight teeth. The new variants also include a helical and a straight pinion with module 1.5 teeth.

Signal devices warn, guide and protect. Thanks to EvoSIGNAL by WERMA, it easier than ever before to find the right signal device: the simple, modular system covers almost all fields of application. EvoSIGNAL is the new standard solution for the signalling sector. Just three steps to find the optimum solution Customers are guided to the perfect product for their particular application in just a few steps – making the problems of incorrect purchases and time-consuming exchange processes a thing of the past. “With the help of our Quickfinder or our online configurator, it’s easy to put together the ideal signalling product. Select the size – specify the type of signalling – choose the type of assembly – done!”, says Michael Groll, Marketing Manager at WERMA Signaltechnik. “With EvoSIGNAL, our customers also benefit from our ‘best-in-class philosophy’, of course, because it goes without saying that no compromise is necessary when it comes to intuitive assembly, robustness, certification, acoustics or light effects with twin functions – which can also be used for escalation", adds Winfried Huber, Head of Sales and Distribution, Germany. Three size categories and maximum flexibility There are three size categories (MINI, MIDI and MAXI) to choose from in combination with optical/acoustic signalling options and ingenious mounting adapters. These cover all types of application – and with significantly fewer variants. - EvoSIGNAL MINI offers ‘close-range’ solutions. This small signal device is ideal for signalling over short distances. - EvoSIGNAL MIDI was designed for signalling predominantly over medium distances and allows optical, optical-acoustic or purely acoustic signalling. - EvoSIGNAL MAXI covers long distances that require an attention-grabbing optical signal.

Vorteile der Protecta X LED: Revolutionäres Design, um Vorteile der LED-Technik voll auszunutzen Lumen Output 2696lm oder 5230lm Betriebsdauer > 120.000 Stunden bei 25°C Marktführende Effizienz von 135 Lumen per Watt Benutzerdefinierte Lichtverteilung durch Linsentechnik 50% Energieeinsparung gegenüber Leuchtstoffröhren Innovativer Akku-Stab für schnelle Installation, ohne das Gehäuse zu öffnen Zertifiziert nach ATEX und IECEx, Zone 1/21

It is often the little things that make everyday work easier. Lo and behold, here comes the multitool - in this form exclusively available at ipf electronic. The small multitool AY000154 fits in every trouser pocket and integrates a total of eight tools, including six Allen keys for fastening the sensors from ipf electronic for querying pneumatic cylinders. Especially the Allen key with 2.5mm is mostly missing in comparable multitools and also the key with 0.7mm is usually not available in most tool sets. If, for example, the potentiometer of an optical sensor needs to be adjusted, it is not necessary to look for a suitable screwdriver, because the multitool also contains two suitable solutions.

Increased design requirements for gas or dust explosion hazardous areas represent a high level of responsibility for the installer and operator of these systems! Only temperature sensors approved by accredited test centers meet the high requirements of DIN EN 60079-0! Find the right sensor from our extensive European and international approvals (ATEX / IECEx & EAC Ex). We would be happy to support you with this.