Exhibitor products

Nachträgliche EMV-Schirmung von Kabel und Leitungen durch das aufweitbare Geflecht sind problemlos möglich. Erdungsbänder mit verschiedenen Außenmaßen als Meterware oder Stückware für einen optimalen Ableitstrom an Gehäusen oder sonstigen metallischen Gegenständen. Geflecht in blank, verzinnt oder vernickelt erhältlich.

Quick and simple: Beside the costs, time also plays an important role in the planning of projects. SHORTRON connect with direct M12 connection enables a simple, fast and, above all, safe installation of the pushbuttons and switches, because the M12 connection technology is designed in such a way that a reverse or incorrect polarity of the connections is not possible - based on the plug & work principle: plug in and start. In addition, no separate contact element is being needed as it already is integrated in the switch. Completely protected: For the use of SHORTRON connect, an expensive and time-consuming installation of an enclosure is no longer necessary as the IP65 / IP67 protection degree provides a reliable protection against water and dust, in the front as well as on the rear. This principle not only saves costs but also space, especially if the ergonomic SHORTRON connect mounting brackets are being used. They are designed for a simple and quick assembly on 40 mm profiles. By means of the 90° mounting bracket for vertical mounting, as well as the 135° mounting bracket for horizontal mounting, the pushbuttons and switches can be placed and organised as per customer's requirement. Also existing workstations can be expanded in the simplest way. For this purpose mounting brackets in three different versions with 1, 2 or 3 holes are available. Small with design: With a mounting depth of only 33.7 mm (emergency stop 26.7 mm), SHORTRON connect also has the typical compact design of the product family and is therefore ideally suitable for the use in machines, panels and operating units that are increasingly becoming smaller. It has also been taken care to maintain the familiar flat and attractive design of the series, so in addition to the silver-coloured and black front rings also the exclusive version with stainless steel front ring is available.

Georg Schlegel GmbH & Co. KG has expanded its SHORTRON M12 series with an emergency-stop for panel cutout 22.3 mm. The small and compact FRVKOO_M001 with twist release has the degree of protection IP65/IP67 in the front and IP65 on the rear and thus is also suitable for water-splash environments. The emergency-stop´s two contacts (AgNi) are constructed as normally closed contacts (NC) with positive opening according to EN60947-5-1. The emergency-stop has a life cycle of up to 50.000 switching cycles and is designed for a temperature range of -25°C to 70°C. This allows a reliable switching in numerous application fields. The 4-pole M12 connector is A-coded and connected to the emergency-stop via a 25 cm long PUR-cable. The electrical characteristics range from an operating voltage of max. Ue 35 V and operating currents of Ie 4A (AC15) resp. Ie 2A (DC13). The FRVKOO_M001 complies with the standards EN ISO 13850 and EN 60947-5-5.

Our Siemens starter package: Energy monitoring with web server, Cloud connection, network quality measurement and 15 energy meters. Scope of the energy monitoring system A total of 16 measuring points and connection via Modbus RTU.

Optical, acoustic, and combined signaling devices for industrial applications – including ATEX-certified solutions and configurable signal towers. For safe processes and clear communication in demanding environments.

Distance coupling Simple-Flex • up to 6m length without additional intermediate storage • no compensating coupling elements necessary • Conical clamping hub, symmetrical on both sides, or Optional easy-to-assemble half-shell hub • Two tube sizes up to torques of 1000Nm • Temperature range up to + 100 ° C

Despatched in 24 hours or less, Simple Select is perfect for applications where quick installation and fast delivery are paramount.

The good news is that the further development of Ethernet transmission technology and PoE power supply with currently up to 90 W also creates new applications with Ethernet interfaces. In addition, there is a growing need for uniform, lean transmission technology, both in terms of the transmission protocol and the hardware, connectors and cabling. Ideally, right down to the field level to the sensors and actuators. This should be possible with Single Pair Ethernet (SPE). With the start in the automotive industry, the technology begins to find its way into industry and, in the long term, into buildings. The SPE topic has been known for some time and since the SPS 2019 trade fair at the latest, it has made itself felt in all media. As an innovative manufacturer for high quality in the field of contact technology and connecting elements in the market segments of industrial electronics, data and communication technology as well as in building technology, we at METZ CONNECT also deal with single pair Ethernet technology. Be it in devices, control cabinets, systems or infrastructure, both in industry and in buildings. Based on market knowledge, we assume that the first SPE applications will develop in industry. METZ CONNECT begins the first step with premium membership in the Single Pair Ethernet Industrial Partner Network. We are one of more than 30 strong partners to support the IEC 63171-6 connectors. We look forward to actively working in the SPE Industrial Partner Network. In Single Pair Ethernet we see a groundbreaking technology for the development of further Ethernet-capable end devices, sensors and actuators, be it at the field level in industry or in smart buildings.

Featuring all of the benefits of the GV3 system, SL2 is a corrosion resistant, stainless steel linear guide system for use in food and medical industries, or corrosive environments. Offers all of the inherent benefits of GV3 system – But with hardened stainless steel bearings and slides for any application requiring corrosion resistance. Corrosion resistance – Suitable for any application requiring corrosion resistance or for use in specialist environments including clean room, wash down and corrosive environments. A solution for challenging industries – SL2 is ideally suited for nuclear, food and beverage, medical, pharmaceutical, electronic, and scientific applications. Lubrication options – A range of special greases are available for use with food applications, in clean room environments or when performing under extreme temperatures or in a vacuum.

- Affordable sensor series for measuring compressed air consumption - 10 different measuring ranges - Calorimetric measuring principle - Analog output 4…20 mA - PNP switching output - LCD display - Cable connection

Explosion-proof slot resistance thermometers are used to measure the winding temperature in the stator of generators or electric motors for the approved “intrinsic safety” and “increased safety” types of protection. ExNWT’s can be equipped with platinum thin-film measuring resistors (chip) or also be manufactured as a wound version. The chip variant records the temperature at specific points in a very small area, since the temperature-sensitive length of the thin-film resistor is just a few millimeters. The coiled variant records the average temperature over the entire active length of the sensor. Dimensions depend on the stator and can be adapted to the different slot sizes.

RFID tracking: clever solutions with RFID cable ties and accessories. HellermannTyton has developed a range of RFID cable ties, accessories and RFID readers to make your RFID tracking and identification processes more efficient.

Smart cameras and vision sensors solve a wide range of industrial image processing tasks and combine image recording, image evaluation and interfaces in one housing. The highly modular hardware platforms in combination with high-performance uniVision machine vision software enable tailored adjustment for all machine vision applications. Variants with auto-focus or C mount are available. As a complete image processing system in sensor format, smart cameras and vision sensors allow for easy setup of an image processing application. With intuitive operation and maximum functionality, a wide range of industrial image processing tasks can be carried out without the complexity of assembling and setting up a PC-based vision system.